3-12
To Log In, perform the following steps on a 4005 that is at the High-Level Status
screen (**SYSTEM IS NORMAL**):
1. Obtain the appropriate passcode information.
Note: All passcodes consist of a four-digit number. When moving from
one digit to the next, an asterisk (∗) appears in the place of an
entered number for security purposes.
2. Press <Menu>.
3. Press and hold <óNext> until [Passcode] is displayed, and then press
<
Enter>.
4. Press and hold <óNext> until [Log In] is displayed, and then press <Enter>.
5. Press <óNext> to scroll through the numbers on the display until the
appropriate number is displayed.
6. Press the right arrow <ö> to move the focus brackets [ ] to the next digit
in the passcode.
Repeat Steps 5 & 6 until all numbers are entered.
7. When the passcode is correct, press <Enter> to Log In.
To Log Out, perform Steps 1 through 4 above except for Step 4 where you need
to press and hold <ó
Next> until [Log Out] is displayed.
Note: When the keypad is inactive for 10 minutes, the 4005 defaults to
Level 1.
Continued on next page
Passcodes and Access Levels, Continued
Logging In / Out
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
