Need help?Do you have a question about the Simplex 4004 and is the answer not in the manual?
General| Brand | Simplex |
|---|---|
| Model | 4004 |
| Category | Smoke Alarm |
| Language | English |
General introduction to the 4004 Fire Alarm Control Panel (FACP) and its functions.
Specifies the operating conditions for the 4004 system, including temperature and humidity.
Details the grounding requirements for the 4004 FACP, including wire gauge and connection points.
Outlines the voltage and frequency specifications for the 4004 system's power supply.
Explains the battery backup capabilities and standby operation duration for the 4004 system.
Lists the key features and capabilities of the 4004 Fire Alarm System.
Illustrates the physical layout of cards and wiring areas within the 4004 system.
Details the UL 864 listings and NFPA standards applicable to the 4004 system.
Lists NFPA codes and standards relevant to fire alarm system installation.
Describes optional modules like voice control panels and annunciators for the 4004 system.
Lists the necessary tools and equipment for installing the 4004 system.
Provides instructions and diagrams for mounting the 4004 back box.
Refers to diagrams for basic and detailed information on 4004 system wiring.
Explains the base system board, IDC types, and their functions.
Details modules for expanding the 4004 system's zone capacity.
Describes jumper selections for NAC operation and service switch functions.
Guides on configuring the 4004 system using panel controls.
Overview of the 4004 fire alarm control panel's user interface and indicators.
Explains the function of each key and LED on the 4004 operator interface.
Step-by-step guide for powering up and initializing the 4004 FACP.
How the system handles and displays supervisory conditions.
Procedure for activating and using the Walk Test feature.
Guidelines for conducting periodic fire drills and system tests.
Procedures for responding to alarm, supervisory, or trouble conditions.
Provides definitions for technical terms related to the 4004 Fire Alarm System.
Explains standby operation duration based on battery capacity.
Guides on calculating required battery size based on system load.
To Next Page
