To Next PageTo Next Page
Need help?Do you have a question about the Simplex 4002 and is the answer not in the manual?
General| Voltage | 24 VDC |
|---|---|
| Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | Up to 93% RH, non-condensing |
| Interconnect Capability | Yes |
| Compliance | UL |
Overview of the 4002 fire alarm system's functions and capabilities.
Identifies and explains the purpose of control panel pushbuttons and indicators.
Details how the panel indicates normal, trouble, and alarm conditions.
Procedures for responding to, silencing, and resetting alarm or trouble events.
Methods for testing system functions like battery, walk test, and manual evacuation.
Identifies symptoms, probable causes, and corrective actions for system troubles.
Introduction to installation, references, and general notes for the 4002 system.
A systematic 10-step method for installing the 4002 fire alarm system.
General requirements and specifications for fire alarm wiring, including device connections.
Instructions for installing and connecting detectors, horns, and other devices.
Procedures for verifying wiring integrity and making final connections.
Configuration of system functions using DIP switches SW1, SW2, and SW3 for operation.
Explains the Expanded Simplex Programming option for custom system operations.
Details on custom operations for signal circuits, relay controls, and fan/damper control.
Covers various advanced functions like cross zoning, timing, and non-alarm points.
Describes the module's features, panel, and field connections.
Configuration of DIP switches for module operation, addressing, and supervision.
Interconnection diagrams and wire length charts for fan control modules.
Guidelines for testing and maintaining system batteries using voltage response.
