To Next PageTo Next Page
Need help?Do you have a question about the Simplex 2098-9207 and is the answer not in the manual?
General| Category | Smoke Alarm |
|---|---|
| Model Number | 2098-9207 |
| Type | Photoelectric |
| Temperature Range | 0°C to 49°C |
| Humidity Range | 10% to 93% non-condensing |
| Weight | 0.5 lbs |
| Alarm Sound Level | 85 dB at 10 feet |
| Compliance | UL |
Guidelines for mounting a single 2098-9207 unit to a ceiling or side wall.
Spacing and placement recommendations for multiple 2098-9207 detectors.
Details on the input power and relay contacts for the transmitter unit.
Details on receiver relay contacts, power, and tamper switch connections.
Step-by-step guide for initial optical alignment of the transmitter and receiver units.
Procedure for selecting and setting the detector's sensitivity based on beam length.
Detailed steps for precisely aligning the detector using a VOM and adjustment screws.
Describes the expected LED indicators and reference voltage during normal detector function.
Identifies causes and indicators for transmitter and receiver trouble states.
Details the LED indicators and reset procedure when a fire alarm condition occurs.
Instructions for cleaning the detector covers to ensure proper operation and sensitivity.
Procedure for checking and calibrating the detector's reference voltage annually.
Details on mounting the 2098-9816 Remote Indicator Plate to standard electrical boxes.
