ACCESSORY MOUNTING
2098-9818 Remote Indicator Plate
Mount the 2098-9816 Remote Indicator Plate to one of the following boxes (see Figure 14):
l
Standard two-gang switch box
(two boxes ganged
together) having a minimum depth of 2-l/2” OR
l
4” square box (l-1/2” deep) with a plaster ring (two-device cover) that is raised 1”.
TWO-GANG SWITCH BOX.
3” x 2” x 2%”
DEEP.
A
(NOT SUPPUED)
2696-9616
REMOTE INDICATOR PLATE
I
MOUNTING
SCREWS
(SUPPLIED
WITH 2099-9616
PLATE)
MOUNTING SCREW
(NOT SUPPLIED1
\
4” SQUARE BOX 1
(NOT SUPPLIED)
TER
RING (TWO-DEVICE COVER),
20994616
REMOTE INDICATOR PLATE
H” DEEP
RAISED 1”
NOTE: DEW& MOUNTING TASS ARE 3-g/32” APART.
Mounting of 2098-9816 Remote Indicator Plate
FIGURE 14
17
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
