3-17
The 4005 allows you to view each configured point in the system and, depending
on your access level, control and disable/enable the point you are viewing. This
section describes how to view, control, and disable/enable points.
To view a specific point, press <
Menu>, press <óNext> or < Previous> to
choose the VIEW POINTS option, and then press <Enter>. The points are
arranged in the menu structure as shown in Figure 3-4 (page 3-11).
To navigate the point database, press <ó
Next> or < Previous> to scroll up
and down through the points.
Note: Pressing and holding <ó
Next> or <Previous> allows the list to
scroll without sounding the tone-alert.
Continued on next page
Control / View Points
Overview
View a Point or List
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
