Simplex 4005 - Page 42

3-24
Table 3-12 describes the steps to access the Lamp Test.
Table 3-12. Lamp Test
Step Action LCD Display
1.
Log In to the 4005 at Access Level 1, 2, 3, or 4.
2.
From the High-Level Status display, press
<
Function>.
3.
Press <ó
Next> or < Previous> to scroll through
the menu until [
Lamp Test] is displayed and then
press <
Enter>.
4.
All LEDs on the control panel and all LCD
segments on the display illuminate.
Function Menu, Continued
Lamp Test
6<67(0,61250$/

DP )UL-XO
6<67(0,61250$/

&RQWURO>/DPS7HVW@


Technical Manuals Online! - http://www.tech-man.com