3-23
Table 3-10 describes the steps to access the Elevator Bypass.
Table 3-10. Elevator Bypass
Step Action LCD Display
1.
Log In to the 4005 at Access Level 3 or 4.
2.
From the High-Level Status display, press
<
Function>.
3.
Press <ó
Next> or < Previous> to scroll through
the menu until [
Elevator Bypass] is displayed and
then press <
Enter>.
4.
Press <ó
Next> or < Previous> to select [On] or
[
Off] and then press <Enter>.
5.
Press <
Enter> again to confirm your choice.
6.
If [
On] is selected in step 4, the display shown at
the right appears and a trouble is displayed.
7.
Press <
Enter> again to confirm your choice.
Table 3-11 describes the steps to access the Doorholder Bypass.
Table 3-11. Doorholder Bypass
Step Action LCD Display
1.
Log In to the 4005 at Access Level 3 or 4.
2.
From the High-Level Status display, press
<
Function>.
3.
Press <ó
Next> or < Previous> to scroll through
the menu until [
Doorholder Bypass] is displayed and
then press <
Enter>.
4.
Press <ó
Next> or < Previous> to select [On] or
[
Off] and then press <Enter>.
5.
Press <
Enter> again to confirm your choice.
6.
If [
On] is selected in step 4, the display shown at
the right appears and a trouble is displayed.
7.
Press <
Enter> again to confirm your choice.
To reverse Doorholder Bypass: Repeat steps 1 – 5 above then press
<
SYSTEM RESET>
Continued on next page
Function Menu, Continued
Elevator Bypass
Doorholder Bypass
DP :HG-XO
&RQWURO>(OHYDWRU%\SDVV@
(OHYDWRU%\SDVV
&RQWURO>2II@ 6WDWXV 2))
(OHYDWRU%\SDVV
7URXEOH3RLQW 7528%/(
SP:HG -XO
&RQWURO>'RRUKROGHU%\SDVV@
&RQWURO>2II@ 6WDWXV 2))
7URXEOH3RLQW 7528%/(
Technical Manuals Online! - http://www.tech-man.com