Warnings and Cauons — 1
1 WARNINGS AND CAUTIONS
e following images indicate important safety information:
is General warning symbol points out important
information that, if not followed, could endanger
personal safety and/or property.
is Explosion warning symbol points out poten-
tial explosion hazards.
is Fire warning symbol points out potential re
hazards.
is Electrical warning symbol points out poten-
tial electrical shock hazards.
is load bank is high-powered, technical, industrial equip-
ment operating at dangerous voltages and temperatures. It is
capable of damaging itself, property or personnel if improperly
used. It is not a consumer product.
It must be installed, connected and operated by personnel
properly trained and experienced in its use. An operator’s man-
ual is supplied with each load bank and available online at www.
simplexdirect.com. e operator must be familiar with its con-
tents and have access to it during operation.
• High Voltage: Turn o and disconnect power source before
opening this equipment
• High Temperature: Allow hardware to cool before servicing
or opening this equipment.
• Rotating Equipment: Ensure that the fans have stopped be-
fore opening this unit.
• For Operator Safety: Make sure this equipment is properly
grounded when in use.
All compression-type connections on fuse blocks, load
blocks, and contactors should be checked for tightness frequent-
ly. is check should be established as part of routine mainte-
nance.
e following cautions should be observed before and during
operation:
• Check intake and exhaust screens as well as fan and load ele-
ments for foreign objects.
Safety
information
SymbolS
CautionS