EasyManua.ls Logo

Simplicity 2690817 - Dashboard Display Layout

Simplicity 2690817
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Dashboard Display and Functions
Dashboard Display
Refer to Figure 3.
A. FUEL LEVEL
Indicates the amount of fuel in the fuel tank. Left is
empty; right is full.
B. HOUR METER / CLOCK / SERVICE INDICATOR
Displays the clock, hour meter, and maintenance
reminder.
C. SELECT BUTTON
Used to set the clock and reset the maintenance
reminder.
D. SET BUTTON
Used to set the clock and reset the maintenance
reminder.
E. PTO LIGHT
Indicates the PTO switch is in the ON position.
F. CRUISE CONTROL LIGHT
Indicates that the cruise control is engaged.
G. LOW OIL PRESSURE LIGHT
Indicates that the engine oil pressure is low. The light will
turn on when the tractor is first started and then go out.
IF THIS LIGHT TURNS ON WHILE THE TRACTOR IS
IN USE, TURN THE ENGINE OFF IMMEDIATELY.
Contact your authorized dealer for service.
H. LOW VOLTAGE LIGHT
Indicates that the electrical system voltage is low. The
light will turn on when the tractor is first started and then
go out. IF THIS LIGHT TURNS ON WHILE THE
TRACTOR IS IN USE, TURN THE ENGINE OFF
IMMEDIATELY. Contact your authorized dealer for
service.
Figure 3. Dashboard Display
Cruise PTO
A
B
C
D
H
G
F E
Dashboard Functions
DASHBOARD DISPLAY MODELS
Display Total Running Hours - When the key switch is
first turned to the RUN position, all warning indicators will
light and the total running hours will be displayed. Be
sure all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the
PTO, and turn the key to RUN (engine off).
Set the Clock - Start the engine, leave the engine
running. Depress the select button (C, Figure 3) for three
(3) seconds and release. Depress set button and HOLD
to advance time. Depress select button to select
minutes. Depress and HOLD set button (D) to advance
time. Leave alone for 5 seconds and clock will activate.
Shut off engine.
Demonstration Mode - With the engine off, hold down
the set button (D) and turn the key switch to RUN.
Maintenance Reminder - A maintenance reminder will
display in the information window (B) after the first 5
hours of operation, and then after every 50 hours. The
reminder will automatically reset after 5 hours. The
reminder can be manually reset by turning the key switch
from OFF to RUN (with engine off) and then depressing
the set (D) and select (C) buttons simultaneously for 5
seconds.
FEATURES AND CONTROLS
Not for
Reproduction

Related product manuals