EasyManua.ls Logo

Simpson CM60976 - Starting Procedure and Testing

Simpson CM60976
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 14
Use of an extension cord could cause shock or burn resulting in death or serious injury.
DO NOT use an extension with this electric pressure washer. Your home’s electrical circuit
receptacle or extension cord may not provide lifesaving ground fault circuit interrupting
protection.
ELECTROCUTION HAZARD
DANGER:DANGER:
RESET
TEST
RESET
TEST
6. Press the TEST button (A). The indicator light (B) should now be dark (OFF).
7. Press the RESET button (C). The indicator light (B) will now be illuminated (ON).
A
B
C
NOTICE - DO NOT use the pressure washer if the above test fails.
8. Press the master ON/OFF button on the pressure washer to the ON (l) position.
9. Point the gun in a safe direction, open the trigger lock and squeeze the trigger.
The electric pressure washer motor will start as the spray gun trigger is
depressed and will continue to run even when released.

Related product manuals