Page 6
12
Assemble the spray gun
Organize accessories
1. Thread the lance into the spray gun.
1. Place the spray gun and lance
assembly into the holder on the
dashboard.
2. Push the nozzles into the
rubber grommets on the
dashboard. Note: the dashboard
label indicates correct nozzle
placement.
3. Hang the high-pressure hose
with the strap holder.
3
Attempting to start or use the pressure washer incorrectly can result in motor and/
or pressure washer damage, and may cause serious injury or death. To avoid these
hazards, be sure to read, understand, and follow the steps outlined in the OPERATING
CHECKLIST section of the owner’s manual before beginning, and follow all the guidelines
for proper use of the pressure washer.
OPERATING CHECKLIST
WARNING:WARNING:
To Next Page
Loading...
