Maintenance
20221586B 111
products in the group
(synchronized).
STAND ALONE: Source
selection for the autopilot will
not be transferred to other
products in the Simrad Group
(no synchronization).
Backlight Illumination
Set backlight to synchronize
with one of the illumination
banks (1-3) available on the
SimNet, or to STAND ALONE
for individual control of the
autopilot illumination.
Instance number
An item to identify units by a
number when the autopilot is
connected to a NMEA2000
Network. On SimNet units the
Instance number is added to the
product name e.g. AP26-1,
AP26-2 for easy identification
on various display screens.
SimNet gateway
Indicates which control unit that
transmits and receives
information on SimNet. The
display verifies by reading
‘Yes’, all other units read ‘No’.
Global SimNet reset
Resets the entire SimNet setup in
the Simrad Group and initiates a
new automatic interface setup.
See chapter 4.1.
To Next Page
Loading...
