Installation
20221586B 31
2.15 Dodge in NAV
When dodging in NAV mode, the course displayed as Course To
Steer (CTS) is the boat’s recommended heading. However, the
previous set course is stored by the autopilot. When DODGE is
flashing on the display, the autopilot is no longer in control of
the steering and you must either steer the boat manually or take
control using either Non-Follow-up steering or Follow-up
steering. On manual steering, the clutch (or bypass valve) in the
drive unit will be disengaged when dodging. The autopilot will
remain in the DODGE mode until you exit DODGE by a second
press on the TURN/DODGE/INFO button or until you select
another mode.
Perform dodging the same way as in AUTO mode above.
Quick double press to
activate Dodge mode
To return from Dodge mode, press one of the following:
1.
Selects AUTO mode with the current heading as
the set course.
2.
Returns to NAV mode at present position with
new bearing to waypoint prompt. Keeps all offset
estimates (Wind/current etc.) in the algorithms
(recommended).
3.
Selects NAV mode at present position with new
bearing to waypoint prompt.
2.16 Selecting a different Navigation source
If you have more than one navigation source connected to the
autopilot, you will be able to choose any for navigation. Refer to
the ‘Source Select’ item in the User Set-up menu for details on
selecting a different navigator (page 42).
To Next Page
Loading...
