Simrad BSM-2 - Parts Included in Package; Required Tools and Supplies

6 | BSM-2 Installation manual
Parts included in package
For spare parts and part numbers, see Spare parts and
accessories page 21.
Item No. Description
1 BSM-2 sounder module
1 Ethernet adapter cable, 4.5 m (15 ft)
1
Power cable (bare wires), 2 m (6.5 ft)
Power and GND: 16 gauges -
Switch connection: 18 gauges -
1
Terminal block connection kit, including;
6 Terminal blocks -
2 Jumper wires for impedance selection
4 Screws
1
Spare Fuse kit including;
3A Fuses and fuse holders -
1 Warranty card
1 This manual
Required tools and supplies
Drill
2 mm
(5/64”)
Drill Bit Screw driver Pencil