Simrad CP54 - Page 153

CP34/44/54 Chartplotter Index
Navigation - continued,
- simulator (DeadReckoning) 8-9,A-1
- track navigation 5-17
- trim & highway display 5-11
- turn navigation off 3-14,5-15
- waypoint navigation 5-15
NMEA interface 8-7
- return to NMEA presets 8-20
Page system 2-1
- exchange a display 2-2
- exchange a page 2-2
- rotation inverval 8-5
Palette setup 8-19
PDOP limit 6-8
Pilot menu 5-1
- custom display 5-1,5-13
- ETA & AVN 5-10, A-1
- highway display 5-3,5-5
- NAV active 5-5
- NAV inactive 5-3
- shortcut to pilot serie 5-1
PLOT menu 3-15
- draw line 3-15
- make route 3-15
- plot ship’s position as WP 3-15
- plot target 3-15
- plot waypoint 3-15
- set vertical mark 3-15
Position
- display 5-6
- display setup 5-7
- flashing 5-6,A-2
- setup 8-3
- start 8-3
- update alarm 6-7,6-8
Power off 2-9
Power on 2-9
QuickGuide 8-22
Repair and service 9-2
Routes,
- calculation 7-8
- delete all 8-20
- edit via chart 3-10,3-11
- edit via menu 7-4,7-5,7-6
- make new route from WP list 7-6
- menu 7-1
- navigation 5-16
- navigation setup 5-3
- plot new route 3-15
- route list 7-3
- stored in the memory 7-3
- time to go 7-8
Safety summary 1-2
Satellite status 6-7
Satellites in SDGPS system 6-13
- tracking state 6-13
Setup menu 8-1
Show test display 8-20
SimNet interface 8-7
- return to SimNet presets 8-20
Software version 8-5
Specifications 9-3
Speed,
- average 5-9
- diagram 6-3
- display as SOG/STW 8-3
- dual speed display 5-9
- filter 8-3
- over ground 5-6,6-4
- setup 8-5
- through water 5-9
Status indicator and accuracy 5-7
Symbols 2-7
Targets,
- delete all 8-20
- edit via chart 3-13
- plot new target 3-15
- setup / edit target 7-14,7-15
- stored in the memory 7-14