Instruction manual
107
857-164342 / Rev.C
RS-232 Setup
The RS-232 Setup dialogue box is accessed from several other
dialogue boxes. It specifies the RS-232 communication settings.
Identical settings must be used at the opposite side of the
RS-232 cable.
Parameters
Port - Which RS-232 port do you want to use?
Baud Rate - Select communication rate.
Data Bits - Do you want to use 7 or 8 data bits per character?
Eight data bits per character are standard.
Stop Bits - One or two stop bits?
Parity - Do you want to use bit 8 for error checking?
To Next Page
Loading...
