Simrad EQ60 - Ethernet with RJ45

Simrad EQ60
146
857-164342 / Rev.C
Ethernet with RJ45
This cable contains the Ethernet connection. RJ45 plugs are
used to terminate the cable. Note that these plugs must be
screened to comply to EC rules.
W400 / Rev E
Ethernet 10Base-T with RJ45 plugs
Pairs
Pairs
1
1
3
3
2
2
4
4
5
5
7
7
6
6
8
8
1
1
3
3
2
2
4
4
5
5
7
7
6
6
8
8
RJ45 plug
RJ45 plug
RJ45 plug
Ethernet 10Base-T “Straight Through”
Ethernet 10Base-T “Crossover”
The “crossover” cable is used to cascade HUBs,
or for connecting two ethernet stations or
computers back-to-back without a HUB)
NOTE: In order to prevent noise and crossover,
you are strongly adviced to use the cable pairs
indicated above.
TX Data + (White/Orange)
(1) TX Data + to (3) Recv Data +
Tx Data - (Orange)
(2) Tx Data - to (6) Recv Data -
Recv Data + (White/Green)
(3) Recv Data + to (1) Tx Data +
(Blue)
(White/Blue)
Recv Data - (Green)
(6) Recv Data - to (2) Tx Data -
(White/Brown)
(Brown)
RJ45 plug
Pin 8
Pin 8
View
Pin 1
Pin 1