Simrad EQ60 - GPT Remote Synchronisation

Cable layout
151
857-164342 / Rev.C
GPT Remote synchronisation
This cable is used to connect the General Purpose Transceiver
(GPT) to an external system for synchronisation purposes.
W620b / Rev C
External trigger in/out
25
GPT
25-pin D-sub connector
24
13
12
TrigOut(+)
TrigOut(-)
TrigIn(+)
TrigIn(-)
Several transceivers may be
triggered from an external system by
connecting the TrigIn pins in parallel.
SIMRAD GPT
25
14
1
13
A
uxiliary
connector
(female)
The cable screen is connected
to the plug house.
Conductors 2x2x0.22mm2
Screen Braided pairs and overall braided
Voltage 60 V
Max.diameter Set by the plugs