EN
R2009/R3016 Radar system
Quick Reference Card
¼ Note: This document covers the products:
• R2009 Radar system with 9” portrait display, paired with Halo, 3G, 4G or HD radar sensors.
• R3016 Radar system with 16” widescreen display, paired with Halo, 3G, 4G or HD radar sensors.
• R3016 12U/6X Radar system (IMO CAT 3).
Front panel and softkeys
No. Description
1 Softkeys
Press a key once to access options for the corresponding function.
2 ENT - Enter key
With no menu or cursor active: no function.
With cursor active: press to acquire a target or activate AIS. Press and hold to display options for managing radar and AIS
targets.
Menu and pop-up operation: press to select an option or activate/deactivate an option.
3 Arrow keys
With no menu active: press to move the cursor on the radar PPI.
Menu operation: press to move through menu items and to adjust a value.
4 EXIT - Exit key
With no menu active: no function.
Menu operation: press to return to previous menu level or to exit a dialog.
5 Rotary knob
With no menu active: behavior will depend on operational mode.
Menu operation: rotate to scroll through menu items and to adjust values. Press to select or to save settings.
6 RANGE - Range key
Press the indication + or - to increase or decrease the radar range.
7 STANDBY/BRILL - Standby/Brilliance key
Press once to display the Standby/Brilliance pop-up, press again to toggle between Standby and Transmit.
Press and hold to switch the radar system on/off.
8 Card reader door
9 SD card reader
Using the cursor
Show cursor: Press one of the arrow keys.
Hide and reset cursor: Press the EXIT key.
¼ Note: The cursor cannot be activated, deactivated or moved when a menu or a Settings dialog is open.
http://navico-commercial.com
To Next Page
Need help?
General
