Simrad - RS12 Operation and Installation Instructions
13
H/L Transmission Power
(Located on the handset mic). High (HI) 25 W or Low (LO) 1 W. Press to toggle between
high or low transmission power for the entire channel bank. The HI or LO selection is
shown on the LCD.
Some channels allow only low power transmissions. Error beeps will sound if the
power transmission setting is incorrect.
Some channels allow only low power transmissions initially, but can be changed to
high power by holding down H/L and PTT at the same time.
See Appendix C for a complete listing of channel charts.
SR366N(RS12)
Date:22 AUG 2012
REV.:4
ENT
ESC
CALL
SCAN
DIM
3 CH
WX
MENU
CH
QUIT
RESEND
ACCEPT/OPT/ACK
SILENCE
DISTRESS
16
DISTR CANCEL
INFO
PAUSE
注：黄色文案为要激光镭射部分
面壳 P/N:270100304-1500 -10 1
Close-up of the RS12 base station radio, showing the keys
To Next Page
Loading...
Need help?
General
