Simrad - RS12 Operation and Installation Instructions
37
5-2-9 Call using the Sent Call Log (SENT CALL)
The Call Log contains the contact details for the 20 most recent sent calls, so that you review
details of the call.
BOBBY D
►CALL BACK
DELETE
01 BOBBY D
►INDIVIDUAL
ROUTINE
10:45 UTC
DSC CALL
CALL LOG ▲
DISTR LOG
►SENT CALL ▼
BOBBY D
INDIVIDUAL
ROUTINE
►INTER-SHIP
1. Press CALL to enter DSC mode, then select SENT LOG. Scroll
down to the desired sent call details.
2. The radio displays the details for the most recent sent call as
the first entry (01) in the call log. In the example, the contact
details for the most recent call are displayed.
3. Press ENT to advance to next screen. You now have the following options:
CALL BACK
to CALL the contact.
DELETE to delete the entry from the call log, select YES to confirm.
5-2-10 Request the LL Position of a Buddy (LL REQUEST)
SAM
LL REQUEST
►SEND?
LL REQUEST
►SAM
TOM
BUDDY #3
DSC CALL
DISTR LOG ▲
SENT CALL
►LL REQUEST▼
SAM
LL REQUEST
CALLING...
1. Press CALL to enter DSC mode, then select LL REQUEST.
2. Select the buddy whose LL position you want to request
then press ENT to send the request. (See Section 5-3-5 for
the acknowledgement.)
3. The working channel name is displayed while the radio waits for an acknowledgement
from your buddy. If there is no reply after 30 seconds the radio asks if you want to retry.
Continue as explained in Section 5-2-2.
BOBBY D
INDIVIDUAL
ROUTINE
►SEND?
SAM
LL REQUEST
WAIT.. 00:17
To Next Page
Loading...
Need help?
General
