Simrad - RS12 Operation and Installation Instructions
42
However, If AUTO SWITCH =OFF, then AUTO SW OFF will be displayed and manual channel
change is required:
TOM
AUTO SW OFF
CH13 REQUEST
▲▼ 00:25
CALL FROM
TOM
AUTO SW OFF
▲▼ 00:22
GP 012345678
CALL FROM
TOM
▼ 00:12
10:12 UTC
ENT–> ACCEPT
KEY->SILENCE
▲▼ 00:35
CH13 REQUEST
10:12 UTC
ENT–> ACCEPT
▲▼ 00:32
AUTO SW OFF
CH13 REQUEST
10:12 UTC
▲▼ 00:28
3. The call data is stored in the Call Log (see Section 5-2-7).
5-3-4 Receiving a Geographic Call (GEOGRAPH)
A geographic call is received by vessels within a specific geographic boundary area.
1. When you receive notification of an GEOGRAPH call, press SILENCE (+ or - CH SELECT)
to silence the alarm. If the radio recognises the user MMSI as one of your buddies, the
buddy’s name is displayed in place of the user MMSI.
2. Press ACCEPT (ENT) to switch to the designated channel immediately or press QUIT
(ESC) to return to the current working channel.
TOM
CH13 REQUEST
10:11 UTC
▲▼ 00:25
CALL FROM
TOM
CH13 REQUEST
▲▼ 00:22
GEOGRAPHICAL
CALL FROM
TOM
▼ 00:12
10:11 UTC
ENT–> ACCEPT
KEY->SILENCE
▲▼ 00:32
CH13 REQUEST
10:11 UTC
ENT–> ACCEPT
▲▼ 00:28
3. Monitor the working channel for an announcement from the calling vessel.
5-3-5 Receiving a Polled Position Call (POSITION)
When you receive GPS position data from a buddy in response to your LL request (see Section
5-2-10), you are recommended to make a written note of the position, especially if it is a good
fishing position. If enhanced LL position information is available from your buddy, this is
shown on the screen until the screen display changes.
TOM
12’23.456’N
123'23.789’E
▲▼ 00:25
REPLY FROM
TOM
12'23.456'N
▲▼ 00:22
POSITION
REPLY FROM
TOM
▼ 00:12
12’23.456’N
123’23.789’E
KEY->SILENCE
▲▼ 00:28
Note: These additional
information screens are
available by pressing
the + and - keys.
Note: These additional
information screens are
available by pressing
the + and - keys.
To Next Page
Loading...
Need help?
General
