46 |
AIS menu | RS40/RS40-B User Guide
7. Press ENT to view full details of the highlighted target such as MMSI,
Vessel name, distance, bearing, heading, ROT, COG, SOG, status and
other vessel information.
T/CPA approach screen
1. When in AIS mode, press the AIS/IC key again to toggle between the
standard AIS screen and the T/CPA Approach screen.
2. In TCPA Approach mode, the approaching AIS target’s details are
listed on the left side along with it’s geographical position on the
plotter PPI.
3. The zoom range is automatically selected to the best range
according to the selected target on the left.
4. Press +/- button or rotate the CH knob to select the target, press
ENT key to display target information, or press X key to return to the
previous display.
¼ Note: If the radio detects a TCPA or CPA breach, the T/CPA Approach
Alert screen will automatically pop up with an alert tone. Press X
to stop the alert. The alert will sound again after 1 minute if the AIS
alarm has not been resolved.
To Next Page
Loading...
Need help?
General
