Simrad Shipmate GN30 mkII - Page 14

#URSORFUNCTION
With chart display active,PRESSTHECURSORKEYTOACTI
VATETHECURSORand PRESS [CLR]TOTURNTHECURSOROFF
(or turn cursor ON/OFF via [MENU], [1], [2] )
5SETHECURSORKEYTOMOVECURSORINANYDIRECTIONON
THESCREEN - the chart will automatically adjust. If the
chart cursor has not been moved for a full 5 minutes, the
cursor will turn off and the ship’s position will be centered
on the screen. The preset 5 min. time-out is adjustable in
Chart setup.
In the standard data displays the cursor will be shown
in form of a line under the active field or as a ruling
box around.
:OOMFUNCTION- with CURSORON, the zoom function
will zoom around the cursor. With CURSOROFF the zoom
function will zoom around the ship’s position.
:OOMINFORDETAILSSMALLERSCALEANDZOOMOUTFOR
OVERVIEWGREATERSCALE
F Use one of the shortcut keys to quickly change the
chart scale:
Press [1] 1:6.600.000 Press [6] 1:20.000
Press [2] 1:2.000.000 Press [7] 1:6.000
Press [3] 1:600.000 Press [8] 1:2.000
Press [4] 1:200.000 Press [9] 1:600
Press [5] 1:60.000
'/4/FUNCTION- has three main functions:
.Direct access to chart display, .Select, change or
stop navigation, .Home function for cursor or ship.
ZOOM
+
IN
ZOOM
-
OUT
CLR
#HAPTER '.-+))#HARTANDPOSITIONMENUS
14