The [GOTO] key is a shortcut to call up the chart dis-
play from any other display.
With chart in display, press [GOTO] to call up info
window with available navigation modes:
To select ’Cursor’ navigation will
require that the cursor is active.
’Waypoint’, ’Route’ and ’Track’
navigation will require that there
is at least one stored in the
memory.
For further details on the different NAV modes, refer
to section:
4.1.1 Cursor navigation, 4.1.5 Waypoint navigation
4.1.7 Route navigation, 4.1.10 Track navigation
If pressing the [GOTO] key while one of the NAV
modes is active, a warning will pop up on the screen:
Press [1] to advance to the
next waypoint in the
route (Route navigation).
Press [2] if you for some
reason have drifted off
course and wish to con-
tinue to the approaching
waypoint. Press [3] if you wish to change the current
form of navigation mode e.g. from route to waypoint
navigation. Or press [MENU] to remove the INFO win-
dow without making any changes.
. Press [GOTO] to select ’Home’ to center the ship sym-
bol or cursor position on the screen.
Press [MENU] to turn off the info window
Select NAV mode
#URSOR
2:Waypoint
3:Route
4:Track
Home: GOTO
Exit: MENU
GOTO
MENU
Navigation is ON
7AYPOINTADVANCE
2:Restart to approaching point
3:Change navigation mode
4:Turn NAV OFF
Home: GOTO
Exit: MENU
GOTO
GOTO
'.-+))#HARTANDPOSITIONMENUS #HAPTER
15
To Next Page
Loading...
