SIMTEC TRACSCAN 2.0 - Archive

Operating Manual TRACSCAN 2.0
V2.0, 2022-05 18 / 36
Parameter Description
never shown for ANSI and NFSI measurements, despite of the set-
ting of this parameter.
Bluetooth The Bluetooth Controller of the instrument can be Disabled, can be
turned on if the instrument is turned on (value On Demand) or can
be turned on if the instrument is turned on or is powered by USB
(value Always On).
Note that the Bluetooth feature is not yet fully implemented.
Date and Time
UTC Offset The real time clock of the instrument provides a Coordinated Uni-
versal Time (UTC). The measurement timestamps are stored as UTC
timestamps.
In the (printed) reports, the local time is displayed. The local time is
defined
by an UTC Offset, e.g., +01:00 hour for Western European
Time.
Date Format The instrument
supports several date formats that define how the
date is displayed.
Time Format The instrument
supports several time formats that define how the
time is displayed.
Table 12: Instrument Settings
Modified instrument settings are saved automatically when the instrument shuts down.
4.7. Archive
Once a measurement has been completed, the measurement data are stored in the archive.
Up to 2048 measurement can be stored; the oldest record is overwritten if the maximum size
has been reached.
Per default, only valid measurements are stored, but the instrument can also be programmed
to store all measurements, see instrument setting [Store Invalid Results].
Figure 5: Measurements Menu