Need help?Do you have a question about the Simtronics MultiFlame DF-TV7-T and is the answer not in the manual?
General| Type | Flame Detector |
|---|---|
| Storage Temperature | -40°C to +85°C |
| Detection Range | Up to 65 meters for n-heptane |
| Response Time | Less than 5 seconds |
| Operating Voltage | 18 to 32 VDC |
| Power Consumption | Typically 2.5W |
| Operating Temperature | -40°C to +70°C |
| Humidity | 0-95% RH (non-condensing) |
| Housing Material | Stainless steel |
| Protection Rating | IP66 |
| Approvals | ATEX, IECEx |
Lists various industrial applications for the flame detector.
Details the multi-spectrum IR flame detector version.
Details the combined UV and IR flame detector version.
Provides detailed technical specifications for the detector.
Describes the detector's interchangeable detection cartridge.
Explains the automatic optical self-test feature.
Introduces the tool for configuring and testing the detector.
Explains the product code structure and its components.
Basic information on detector types and self-test functions.
Details the 4-20mA output signal configurations and fault levels.
Covers power supply and consumption specifications for the detector.
Specifies operating and storage environmental conditions.
IP rating and RFI/EMI compliance information.
Details European performance standards compliance.
Material, weight, and ATEX/IECEx ratings for the housing.
Details the functional safety certifications (SIL).
Details fire class sensitivity and detection ranges for various fuels.
Describes the angular detection range of the detector.
Evaluates immunity to false alarms from various sources.
Guidance on selecting an appropriate installation location for the detector.
Details various mounting options and bracket types.
Instructions and recommendations for detector wiring and connections.
Instructions for removing and installing the detection cartridge.
Checks for correct installation and connections before power-up.
Procedure for powering up the detector and checking status.
Steps for performing operational tests on the detector loop.
Guide on using the LT15 test lamp for functional testing.
Factors affecting detector performance like dust or vapour.
Explains maintenance inhibition modes and permanent inhibition.
Details signal current loop states and TLU status codes.
Describes LED indications for power status and faults.
Explains the red LED indication for alarm states.
Information on using the TLU600 for settings and tests.
Accessing detector identity, settings, and status information.
Access to all detector settings like time delay and sensitivity.
Handles tests on the detector like flame simulation and loop tests.
Recommends biannual checks for visual inspection and cleaning.
Lists common symptoms, causes, and actions for detector faults.
Instructions for replacing the detection cartridge.
Instructions for replacing the entire detector unit.
General safety precautions for using the detector.
Information on document ownership and confidentiality.
Lists relevant certifications and standards for the detector.
Details the functional safety certifications (SIL).
Lists the ATEX and IECEx approvals for the detector.
Information regarding CE-RPC certification.
Explains the marking applied to the detector.
Lists available accessories for the detector.
Lists available spare parts for the detector.
To Next Page