Singer 201P - Page 30

Skipping of stitches might be caused
by:
1. Incorrect
page 8.
2. Needle blunt or bent.
setting of needle. See
3. Needle too small for thread. See
page 9.
4. Needle rubbing presser foot.
Gathering or Puckering of material
might be caused by:
1, Failure to use crisp lawn or organdy
backing when stitching on sheer
materials.
2. Excessive needle and bobbin thread
tensions.
NOTE: If machine runs heavily after
standing idle for a long period, apply
a few drops of kerosene at all oil-
ing points, run the machine for a few
minutes, then wipe clean and apply
SINGER* Oil as described on pages
33 to 37.
SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company’s Trademark ‘“‘“SIMANCO”. 1
Needles in Containers marked
*“*FOR SINGER MACHINES”
are NOT SINGER made Needles. 2
Free instruction for using the machine is gladly given at any
SINGER SEWING CENTRE
29