Singer 20U - Zipper Foot; Zipper Insertion

ZIPPER FOOT
This foot is designed to facilitate the placement of stitching
close to a raised edge. It is attached to the machine in place
of the regular presser foot and may be adjusted to either the
right or left side of the needle.
APPLICATIONS
Zipper Insertion
Corded Seams
ZIPPER INSERTION
Tubular Cording
Slip Cover Welting
Needle Position Selector: Center
Stitch Width Regulator: Straight Stitching Position
Throat Plate: General Purpose or Straight Stitch
Presser Foot: Zipper Foot
Feed Dog: General Purpose or Straight Stitch
When the zipper is to the right of the needle:
1. Loosen the thumb screw B at the back of the foot, and
slide the foot to the left of the needle.
2. Check the position of the foot by lowering the needle into
the side notch A of the foot, making sure it clears the foot.
3. Lock the foot into position by tightening the thumb screw.
When the zipper is to the left of the needle, adjust the
foot to the right of the needle in the same way.
ZIPPER FOOT
- 26