SERVICE MANUAL
33
3. Messages on LCD (9940/9920)
1
2
3
4
5
6
7
8
9
10
1. Winding the bobbin.
2. Lower the buttonhole lever.
3. Raise the presser foot lifter and set the buttonhole foot
to correct position.
4. Release the foot controller pedal.
5. Lower the presser foot.
6. Machine cannot memory any more.
7. Select pattern.
8. Release the reverse button.
9. Rethread the upper thread (9940 only)
10.Release the needle up/down button.
To Next Page
