REGULATING PRESSURE
The pressure dial regulates the pressure that the
presser foot exebts on the fabric; Correct p_essure is
important to insure that tabric feeds smoothly and
evenly, The NORM (normal) setting is an all-purpose
setting that can be used for sewing a wide variety of
fabrics; Lower the presser foot before setting pressure.
To inorease Pressure turn the dla! from NQRMtoward
MAX imaximum) To decrease pressure, turn the dial
from NORM toward _ . For darning, set on
ADJUSTING THREAD TENSION
The _enslon ala controls neeole-mreao [ensJor only
Bobbln-th!'eae tens[or1 no5 Deem se_ at _P_e factory, To
Nerease neee e-tnrea(] _er'_lor _Llrn _neclJa/io a n/grief
qulTber, Tc aecrease ter1slon. _urn Irle Ll_al GO a owe
number. Be ¢}ef_aln fie[ [o accioer17,a]ly [ouch Da_,[efR
_elecnon DUrrOfTS wlset_ 8ojustlng rer1sio_r twowever
_ou Uo So De eFralFl to re-sclec t, Gesifeo oar_€/n
Col'_ect tensior sim Doriar1_ because toe mucr1 Dr TOO
]:_le v weaKen /ou_ seams or mar Trle aooearance of
eecoratlve wc _k. To obtain the correct fension settmq
slake a "_es_ or a SamPle of }/ou_ fabric _ 1:he fob _"
OUcKers oecrease _ens_on • [ne s:_cnes ]o_, oose
increase tension
LIFTING THE PRESSER FOOT
T_e presserZfoot liftes allows you to raise and lower
the p_esser foot. Extra-h!gh lift position permits easy
placement of bulky fabrics. Make sure the lifter is al_
the way down before starting to sew
1!
To Next Page
Loading...
