CLEANING THE MACHINE
CAUTION: Before cleaning your machine, disconnect
power-line plug from electrical supply,
With a soft cloth or lint brush clean at points indicated
by arrews.
Your machine requires no oiling under I_otmal con-
ditions: Your SINGER representative, or Approved
Dealer, will examine the permanently lubricated parts
whenever your sewing machine requires servicing
NOTE: There are no user-serviceable parts inside the
AU_ena 2000 Dectronic Sewing Machine. Therefore any
unauthorized tampering inside the machine will void the
guarantee:
CHANGING THE LIGHT BULB
This machine is designed io use a 15-watt maximum
light bulb, Using thumb and forefinger, puU down on tab
located under light lens to lower the light bracket. Do
not attempt to unscrew bulb.
CAUTION: Before changing Light bulb. disconnect
power-fine plug from electrical outlet
Unlocking Bulb
Locking Bulb
Changing the Light Bulb
19
To Next Page
Loading...
