TWO-STEP BUTTONHOLING
Two-step Buttonhole Foot
For buttons larger than 11/8 nches across or for but-
tons of unusual sha_e or tnlcKness use tne _wo_ste[
method of stdchmg Du[tonno_es
CAUTION: Do not pull down buttonhole lever,
Always maKe a teat outtonnole on a sample of your
fabric wlm qterfacing, f being used Determine length
of button ano mark start aria ena re of buttonhole on
garment. Attach z_g-zag plate and two-step puttonnole
foot. Draw qeedle and bobblr threads under foot [o back
of machine. Place garment under foot so that buttonno_e
start line is a gneu with re(] guideline on foot. Lower
foot Select reou_rea buttonhole 13y pusnlng OUt[On on
stitch selection oanei. See directions for one-step eu[-
[onnonng to balance density of your ouzronnole Start
machine and let It complete step I of buttonhole cycle
Stop macmne ust before gu_aenne on buttonhole foot
reacnes end of bUtTOnhole ena Hne on garmem Press
ou[[c nno e lever away from. 3u. Start machine and let
comolete step 2 of buttonhole cycle Stop sewing Nnen
SD[cnmg reaches s_artlng bar tack. For additiona DUr-
[onnoles. Dress me narrern reDear button and follow the
same procedure.
For sewing on buttons, see instructions in Sewing
Applications book.
16
To Next Page
Loading...
