22
27 & 28
The Adjustment and Operation of the Binder
The edge to be bound should be held well within the centre slot of the scroll, and with a little
practice this is quite easy. If the material is allowed to slip away from the scroll when near the
needle, the edge will not be caught in the binding.
Various materials and conditions require different adjustments of the Binder to bring the stitch-
ing close to the edge. A wider adjustment of the Binder is necessary when binding curves
than when binding a straight edge.
To adjust the Binder, loosen its small screw and move the scroll to the right for a narrower
adjustment, or to the left for a wider adjustment, after which securely tighten the screw. To
become perfectly familiar with the adjustment of the Binder, a little practice is necessary.
To Next Page
Loading...
