6
27 & 28
Stop Motion
This device a allows the hand wheel to run
free, so that bobbins may be wound without
operating the mechanism. To loosen the
wheel hold it with the left hand and with the
right hand turn the stop motion screw over
towards you, as shown in Fig. 3.
To Operate the Hand Machine
Tighten the hand wheel (see Fig. 3) and
place a piece of material under the presser
foot (7, Fig. 5). Then lower the latter by
means of the lifter (3, Fig. 5). Now turn the
handle over from you to work the machine,
without its being threaded, until you are
accustomed to guiding the material with the
left hand.
FIG. 3
To Next Page
Loading...
