7
27 & 28
To Ensure Perfect Action of the Machine
The hand wheel must always turn over
towards you.
Do not work the machine with the presser
foot lowered or with the shuttle and the nee-
dle threaded, except when sewing
Both slides over the shuttle must be kept
closed.
To Set the Needle
(See Fig. 4)
Raise the needle bar to its highest point and
loosen the thumb screw.
(A). Hold the needle with the left hand and,
with its flat side to the right, insert it into the
needle clamp (B) as far as it will
go. Then retighten the thumb screw.
Fig. 4. Positioning Needle in Needle Clamp.
To Next Page
Loading...
