MAINTENANCE
GTZZ18J Operation Manual 9-3 © Oct. 2022
3. Duplicate the Repair & Inspection Report template
for each inspection. Store the completed forms for
10 years or until the machine is no longer in use or
as required by machine owner/company/custodian.
4. Use the following form to record the results. After
one item is complete, check the appropriate box.
5. If any inspection item is marked as “NO”, the
machine must be stopped, and after the repair is
completed, the machine shall be re-inspected and
the box marked “REPAIRED” shall be checked.
Select the appropriate inspection procedure based
on the inspection type.
Table 9-3
REPAIR & INSPECTION REPORT
Model
Serial No.
Checklist A Procedures
Items
YES/Machine is
in Good Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
A-1 Inspect All Manuals
A-2 Inspect All Decals
A-3 Inspect Damaged, Loose
or Lost Parts
A-4 Inspect Hydraulic Oil
Level
A-5 Inspect Hydraulic Oil
Leakage
A-6 Inspect Fuel Level
A-7 Inspect Fuel Leakage
A-8 Inspect Engine Oil Level
A-9 Inspect Coolant Level
(water-cooled engine)
A-10 Inspect Engine Belt
A-11 Inspect Fuel Strainer
(fuel-water separator)
A-12 Inspect Cooling Fan
A-13 Inspect Engine Intake
System
A-14 Functional Tests
A-15 Perform Maintenance
after 30 Days
A-16 Perform Oscillate
Cylinder Exhausting
A-17 Check Connector Tilting
Checklist B Procedures
To Next Page
Loading...
