GTZZ18J Operation Manual 10-1 © Oct. 2022
10 DECALS/NAMEPLATES INSPECTION
Choose appropriate methods to check that all decals
are easy to identify and properly placed.
Replace any lost or damaged safety decals.
Clean safety decals with neutral soap and water. Do not
use solvent-based cleaners, which can damage safety
label materials.
Do not operate any machine with missing decals/
nameplates.
UNSAFE OPERATION HAZARD
All safety labels must be legible to alert
personnel of safety hazards. Replace
any illegible or missing labels
immediately. Safety labels removed
during any repair work must be put back
to their original positions before the
engine is placed back into service. Do
not start an engine if there are missing
or badly worn safety labels.
To Next Page
Loading...
