PRE-OPERATION FUNCTION TEST
GTTZ10EJ Operation Manual 6-3 © Mar. 2022
UNSAFE OPERATION HAZARD
• Unless in emergency situations,
never operate from the ground
control console if there are still
persons on the platform.
• Never operate the machine if any
control handle or switch that
controls the platform movement
is not returned to the OFF position
after being released.
COLLISION HAZARD
Before operating the boom, ensure
the area near or under the platform is
clear of persons or obstructions.
Preparation
1. Turn the key switch at ground controls to the ground
control position.
2. Pull out the emergency stop button at ground
conrols to ON position.
3. Be sure the associated indicator lights are on and
no alarm messages shown on the display.
Emergency stop button
1. Push in the emergency stop button at ground
controls to OFF position, all functions should not
operate.
2. Pull out the emergency stop button at ground
controls to ON position.
Key switch (ground/platform control select
switch)
1. Turn the key switch at ground controls to the
ground control position, all functions shall operate
only at the ground controls, the platform controls
is inoperative.
2. Turn the key switch at ground controls to the
platform control position, all functions shall
operate only at the platform controls, the ground
controls is inoperative.
Function button
Push the function button before activating the
associated function, otherwise the function should
not operate.
Enable button
1. Do not press and hold the enable button, directly
push the function control button, the associated
function should not operate.
2. Simultaneously press and hold the enable button
and the control button, the associated function
should operate.
Mast up/down
1. Push the mast up/down function button.
2. Simultaneously press and hold the enable button
and the up/rotate left control button,the mast
should raise smoothly without abnormal noises.
3. Simultaneously press and hold the enable button
and the down/rotate right control button,the mast
should lower smoothly without abnormal noises,
and the buzzer should sound.
∅52
∅22
∅35
∅55
4X ∅7
∅12.5
R2.5
∅22
4XR6
235
98
78
220
4065
57.540.5
11.2
7.5
1
2
3
4
5
6
7
1
2
3
4
5
6
7
技术要求
1、PVC 不干胶自粘面膜。
2、面膜底色为黑色。
3、颜色要求：上下台切换图标中底座颜色为蓝色，转换方向图案黄色，叉子及平台颜色为黄色，
升降切换图标底座颜色为蓝色，上升图案黄色，下降图案为红色，
急停开关图标底色为黄色、字体颜色为红色,小时指示图标为绿色。
4、所有孔尺寸公差为±0.1；
1
1
2
2
A A
B B
50.0
88.0
更改文件号
审 核
工 艺
处数
标记
设 计
日 期
共 页
签 字
标准化
日期
图 样 标 记
第 页
比 例
重 量
0.45
李申奥
银友国
刘奇志
2018.11.15
1
刘晓
面膜
101013060005
1:1
1
101013060005
∅ 52
∅ 22
∅ 35
∅ 55
4X ∅ 7
∅ 12.5
R2.5
∅ 22
4XR6
235
98
78
220
4065
57.540.5
11.2
7.5
1
2
3
4
5
6
7
1
2
3
4
5
6
7
技术要求
1、PVC 不干胶自粘面膜。
2、面膜底色为黑色。
3、颜色要求：上下台切换图标中底座颜色为蓝色，转换方向图案黄色，叉子及平台颜色为黄色，
升降切换图标底座颜色为蓝色，上升图案黄色，下降图案为红色，
急停开关图标底色为黄色、字体颜色为红色,小时指示图标为绿色。
4、所有孔尺寸公差为±0.1；
1
1
2
2
A A
B B
50.0
88.0
更改文件号
审 核
工 艺
处数
标记
设 计
日 期
共 页
签 字
标准化
日期
图 样 标 记
第 页
比 例
重 量
0.45
李申奥
银友国
刘奇志
2018.11.15
1
刘晓
面膜
101013060005
1:1
1
101013060005
To Next Page
Loading...
