GTTZ10EJ Operation Manual 10-1 © Mar. 2022
10 DECALS/NAMEPLATES INSPECTION
Use appropriate inspection methods to check that all
decals are legible and properly in place..
Replace any lost or damaged safety decals.
Clean safety decals with neutral soap and water. Do not
use solvent-based cleaners, which can damage safety
label materials.
Do not operate machines without decals/nameplates.
UNSAFE OPERATION HAZARD
All safety decals must be legible to
alert personnel of safety hazards.
Replace any illegible or missing
decals immediately. Safety ldecals
removed during any repair work must
be replaced in their original position
before the engine is placed back into
service. Do not operate the engine if
there are missing or badly worn
safety decals.
To Next Page
Loading...
