© Jun 2022 A-8 TB24 Plus&26J Plus Operation Manual
DECALS/NAMEPLATES INSPECTION
REPAIR & INSPECTION REPORT
Inspector Company
Note:
1. The Repair & Inspection Report shall include the inspection table of each regular inspection.
2. Duplicate the Repair & Inspection Report template for each inspection. Store the completed tables for 10 years
or until the machine is no longer in use or as required by machine owner/company/custodian.
3. Use the following table to record the results. After one item is complete, mark the appropriate box.
4. Record the inspection results. If any inspection item is marked as “NO”, the machine must be stopped and re-
inspected after repair is completed and the box marked "REPAIRED” shall be checked. Select the appropriate
inspection procedure based on the inspection type.
Select the appropriate inspection procedure based on the inspection type.
To Next Page
Loading...
