Sinoboom TB24 Plus - Unsafe Operation Hazards

© Jun 2022 3-6 TB24 Plus&26J Plus Operation Manual
SAFETY
UNSAFE OPERATION
HAZARDS
At a minimum, operators must operate and maintain the
machine as stated in this manual and in the
Maintenance Manual in addition to following more
stringent industry regulations and workplace rules.
Never engage in unsafe machine operation.
Do not use the machine in the following situations:
• Unrelated personnel/equipment is present in the
working envelope of the machine.
• Use as a crane (except the custom-made ones with
such functions).
• Use on the truck, trailer, tracked vehicle, ship,
scaffold and the like without written consent by the
manufacturer or a qualified professional.
• Improper securing of the machine to another object
by just leading, fastening or binding.
• Stunt or imprudent use of the machine.
• Overloaded or over-moment situation.
• Other situations as specified in the Manuals.
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum
side force allowed is 600N
(135lbf) restricted/400N (90lbf)
unrestricted.
• Tow the machine only from the
tie-down/lifting points on the
chassis.
• Never use the boom or platform
to stabilize or support any
objects outside of the machine.
• Do not modify any component
that may affect the machine
safety and stability.
• Do not replace key parts that
affect machine stability with the
ones of different weights or
specifications.
• Do not change or modify the
machine without the
manufacturer’s written
permission.
• On the platform, do not attach
an additional device for placing
tools or other materials to the
guardrail. This will increase the
platform weight, surface area
and load.
• Do not put ladders or
scaffolding on the platform or
any part of this machine.
• Do not use the machine on any
mobile or movable surface or
vehicle. Ensure all tires are in
good condition, the slotted nuts
tightened and the cotter pins
complete.
• Do not use a battery that
weighs less than the original
one (26kg [57lb]), and do not
remove or modify the
counterweight or other parts
inside the battery box. The
battery not only provides
power, it also serves as a
counterweight. The battery is
vital to maintaining the stability
of the machine.
• Do not place or attach any
suspended load onto any part
of the machine.