SINTERIT LISA - Table of Contents

2 | Sinterit Lisa printer SHORTENED USER GUIDE
Table of contents
1. Sinterit Lisa 3D printer ....................................................................................................................................................... 3
A. Shortened Description .................................................................................................................................................. 3
2. Preparing the machine to print ......................................................................................................................................... 4
A. Installing/cleaning the LASER PROTECTIVE GLASS ..................................................................................................... 4
3. Printing – STANDARD MODE ............................................................................................................................................. 7
4. Information and tasks while printing ............................................................................................................................ 11
5. Finishing the print .............................................................................................................................................................11
6. Cleaning the printer..........................................................................................................................................................13
7. Technical support .............................................................................................................................................................15
The Shortened User Guide is a shortened version of the Sinterit Lisa printer User Manual. For correct and
trouble-free operation of the printer, please read the Full User Manual available at www.sinterit.com.
Sinterit is not responsible for printer failures caused by not reading the full manual.
Listed below are descriptions of symbols used on the device. They constitute a warning or convey the information
to protect the user, other individuals or surrounding objects and ensure the correct and safe use of the device.
WARNING!
An inevitably dangerous situation which can result in serious injury or even death.
Initiation, an omission of a specic procedure or inattention can cause severe physical
injury to the user.
CAUTION!
IR laser radiation. Looking directly into the laser beam can cause blindness and skin
burns. The laser emits infrared radiation (infrared, IR), which is invisible to humans.
Avoid eye or skin exposure to direct or scattered radiation. Do not stare into the
beam or view with optical instruments.
CLASS 1 LASER PRODUCT IEC 60825-1 Ed.3(2014)
CAUTION!
Beware of sharp edges which can cause body cuts and injury.
STOP!
Action prohibited.
IMPORTANT!
Information essential to correctly perform a specic task.
ATTENTION!
It is necessary to wear Protective Gloves and Protective Dust Mask. Mandatory action
when working with powder.
IMPORTANT!
You must read the full version of these instructions before taking action.
Available on www.sinterit.com