Need help?Do you have a question about the SINTERIT LISA and is the answer not in the manual?
General| Technology | Selective Laser Sintering (SLS) |
|---|---|
| Build Volume | 150 x 200 x 150 mm |
| Laser Type | Diode Laser |
| Laser Power | 5 W |
| Nitrogen Chamber | Yes |
| Software | Sinterit Studio |
| Layer Thickness | 0.075 - 0.175 mm |
| Supported Materials | PA12, PA11, TPE, TPU |
| Connectivity | Wi-Fi, USB |
| Print Speed | Up to 14 mm/h (depending on material and geometry) |
| Power Requirements | 230V, 50/60Hz, 16A |
| Scanning Speed | Up to 2 m/s |
Detailed overview of the Sinterit Lisa 3D printer's components and functions.
Technical specifications of the Sinterit Lisa 3D printer, including dimensions, power, and hardware.
List and images of all items included in the Sinterit Lisa 3D printer package.
Guidelines for designing 3D models, including wall thickness, details, and gaps.
Recommendations for the optimal placement and environmental conditions for the Sinterit Lisa Printer.
Instructions and safety precautions for connecting the Sinterit Lisa Printer to a power source.
Monitoring print status, temperature, and other key information during the printing process.
Steps to follow after the printing process is complete, including print removal.
Procedures for cleaning the Sinterit Lisa printer after printing or for general maintenance.
Step-by-step guide for performing automated printing in the advanced mode.
Step-by-step guide for performing manual printing in the advanced mode.
Monitoring and managing the printing process in ADVANCED MODE.
Steps to complete and finish a print job in the ADVANCED MODE.
Techniques and recommendations for spray painting and coating SLS parts.
Step-by-step instructions for replacing the laser protective glass on the printer.
Procedure for safely cleaning the laser protective glass of the printer.
Instructions for cleaning the area beneath the printer's print beds.
Guide on how to replace the infrared heating units on the Sinterit Lisa Printer.
Detailed instructions for replacing the Recoater wire on the Sinterit Lisa Printer.
Contact information and resources for technical support and manual updates.
Safety precautions and recommended protective equipment when working with powders.
Overview of PA12 Smooth, Flexa Grey, and Flexa Black powders, their properties, and uses.
Parameters and settings for PA12 Smooth, Flexa Black, and Flexa Grey powders in Sinterit Studio.
Specific handling and printing characteristics of PA12 Smooth and Flexa powders.
Procedures for cleaning the printer when switching between PA12 and Flexa powders.
Steps to prepare the Sinterit Lisa Printer for packaging or transport.
Instructions for correctly packaging the Sinterit Lisa Printer for shipping.
Alternative procedures for packaging if original materials are unavailable or damaged.
To Next Page
