The operation may complete quicker: whenever the powder uniformly covers the Print Bed
surface you can press STOPPING .
10. When the levelling is done and the Recoater has returned to its default position, the
cleaning process must be initiated.
● Use an alcohol wipe to carefully clean the vision windows of the camera and
pyrometers, as well as the laser protection glass.
● Clean the infrared heaters (white and red ones) by gently blowing on them with clean
compressed air.
11. Ensure that no tools or previous printouts are left in the printing chamber.
33 Sinterit Lisa USER MANUAL
To Next Page
Loading...
