SINTERIT Lisa X User Manual

Sinterit LISA X
SLS 3D PRINTER
Translation of the original user manual
Please read the manual before using the product.
For the most up-to-date manual, visit our website: www.sinterit.com/support/
Version 01/2023

SINTERIT Lisa X Specifications

General

Brand	SINTERIT
Model	Lisa X
Category	3D Printers
Language	English

Summary

Glossary

Safety Information

Symbols and Visual Cues

Defines warning and caution symbols used in the manual for safety indications.

General Safety Guidelines and Personal Protection

Electric Devices: Power Supply and Grounding

Printer Usage Safety Guidelines

Printer Safety During Repair and Maintenance

Powder Safety While Working

Powder First Aid Procedures

General Information

Intended Use

Describes the purpose and application of the Sinterit Lisa X printer.

Operating Requirements

Lists environmental and technical conditions for printer operation.

Technical Specification

Printer Description

Printer Safety Plate

Unpacking Lisa X

First Start-up

Powering On and Starting the Printer

Step-by-step guide to power up and initiate the printer for the first time.

Mounting the Laser Protective Glass

Connecting to Wi-Fi Network

Main Menu Navigation

Preparing to Print

Preparation General Information

Provides important notes and precautions before preparing for printing.

Choosing the Print File

Guide on selecting the print job file from the printer interface.

Filling the Print Chamber with Powder

Preparing the Printing Chamber

Final Steps Before Printing

During Printing

Printing Process Monitoring

Details on monitoring and managing the active printing job.

Removing and Cleaning the Printout

Cleaning the Printer

Cleaning the Print Chamber

Step-by-step instructions for cleaning the printer's main print area.

Cleaning the Overflow Container

Printing with Speciality Powders

Powder Refreshment

Powder Refreshment with PHS

Procedure for refreshing powder using the Powder Handling Station.

Powder Refreshment with Sieve or Strainer

Basic Maintenance Overview

Cleaning the Pyrometer Window

Cleaning the Laser Protective Glass

Replacing the Recoater Cord

Replacing Print Bed Sealing

Replacing Feed Bed Sealing

Cleaning the F-Theta Scanning Lens

Replacing Reflector Sealing

Replacing Infrared Bulb

Cleaning the Recoater Roller

Checking Recoater Drive Unit Cord Tension

Technical Support

Packing for Shipping

Preparing the Printer for Packing

Steps to prepare the printer for packaging and transport.

Packing into Flight Case

Instructions for safely placing the printer into its transport case.

Legal Notice

Disclaimer

Trademarks

Warranty Information