SINTERIT Lisa X - Technical Specification

Sinterit LISA X User Manual | 11
3.3 TECHNICAL SPECIFICATION
GENERAL INFORMATION
Technology SLS - selective laser sintering
Laser type
IR Fiber Coupled Diode Laser, 30W; λ = 976 ± 3 [nm]
rated to > 30,000 hrs
Laser scanner type Galvo
Dimensions 650x610x1200 [mm] (25.6x24.0x47.2 [in])
Weight 145 [kg] (319.7 [lbs])
PRINT VOLUME
Max size of print diagonally
1
398 [mm] (15.7 [in])
Max print volume
TPU based / Flexible materials: 130x180x340 [mm]
(5.1x7.1x13.3 [in])
PA / PP: 130x180x330 [mm] (5.1x6.7x13.3 [in])
PRINTER PARAMETERS
Size of Print Bed 150 x 200 x 350 [mm] (5.9 x 7.9 x 13.8 [in])
Layer height Z (min-max) 0.075 - 0.175 [mm] (0.003 - 0.006 [in])
Build Speed up to 14 [mm/h] (0.55 [in/h])
PRINT FEATURES
Min. wall thickness from 0.5 [mm] (0.020 [in])
Hole diameter from 0.5 [mm] (0.020 [in])
Moving part clearance from 0.2 [mm] (0.008 [in])
ADDITIONAL PRINTER FEATURES
Inert gas control system built-in
Average inert gas consumption 0.48 [m
3
/h] = 8 [l/min.]
SOFTWARE
Software² Sinterit Studio
Supported le types STL, 3MF, OBJ, 3DS, FBX, DAE
Output le types *.scode, *.sspf, *.sspfz
OS compatibility Microsoft Windows 10 or higher