Table of content
Table of content
1. Dictionary 5
2. Marking text conventions used in the document 6
3. Sinterit Lisa 3D printer 8
A. Description 8
B. Specification 11
C. Contents of the Sinterit Lisa pack 13
D. Parameters - print design guide 14
4. Installation of the printer 15
A. Environment and place of installation 15
B. Power supply: 16
5. Sinterit Studio software - installation 17
6. Initial startup of the device after delivery 19
7. Printer’s connection to the wi-fi network 20
8. Preparing the device to print 22
9. Printing - STANDARD MODE 27
A. Information and tasks while printing 34
B. Finishing the print 36
C. Cleaning the printer 41
10. Printing - ADVANCED MODE 46
A. Printing in ADVANCED MODE: automated version 47
B. Printing in ADVANCED MODE: manual version 50
C. Information and tasks while printing 52
D. Finishing the print in ADVANCED MODE 53
11. Cleaning the prints 57
Painting and lacquering 60
12. Maintenance and service of the Sinterit Lisa Printer 60
A. Laser protective glass - replacement 61
B. Cleaning of laser protective glass 63
C. Cleaning the surface under the Beds 64
D. Replacement of infrared heating units placed around the protecting glass. 66
E. Changing the Recoater wire 66
F. Technical support 68
3 Sinterit Lisa USER MANUAL
To Next Page
Loading...
