C. Packaging if the original packaging is no longer
available or damaged:
1. Wrap the Lisa Printer in multiple layers of bubble wrap so that a cushioning layer with
at least 6[cm] of thickness protects the item,
2. Source a strong outer box which is at least 14[cm] larger than Sinterit Lisa Printer in
all dimensions. This box should be strong enough to protect the printer. We suggest a
dual-wall box,
3. Place 6[cm] of filler material (wrinkled wrapping paper or polystyrene foam) on the
base of the outer box before placing the Sinterit Lisa Printer (wrapped in bubble wrap)
inside,
4. Make sure the printer sits straight and the flap facing up! ,
5. Place the Lisa Printer inside the outer box or flight case - centered,
6. Fill (wrinkled wrapping paper or polystyrene foam) all available space for best results,
7. Close and seal the box by H-taping with pressure sensitive tape,
8. Secure the package with straps so that it does not move on the pallet,
9. Seal the whole package with stretch wrap,
10. Mark where the top of the device is,
11. Mark the package as “fragile”.
78 Sinterit Lisa USER MANUAL
To Next Page
Loading...
